{ "disks": { "1": { "dirs": [ { "path": "/", "files": [ { "name": "IBMBIO COM", "size": 33718, "date": "1992-09-01", "time": "12:00" }, { "name": "IBMDOS COM", "size": 37362, "date": "1992-09-01", "time": "12:00" }, { "name": "COMMAND COM", "size": 47990, "date": "1992-09-01", "time": "12:00" }, { "name": "README DOC", "size": 7154, "date": "1992-11-17", "time": "11:09" }, { "name": "INIT BAT", "size": 51, "date": "1992-11-17", "time": "11:09" }, { "name": "INSTALHD BAT", "size": 692, "date": "1992-11-17", "time": "11:09" }, { "name": "INSTPEEL COM", "size": 14, "date": "1992-11-17", "time": "11:09" }, { "name": "GENPEEL BAT", "size": 562, "date": "1992-11-17", "time": "11:09" }, { "name": "PEEL EXE", "size": 215152, "date": "1992-11-25", "time": "15:26" }, { "name": "PEELXLT EXE", "size": 77824, "date": "1993-08-31", "time": "14:57" }, { "name": "PEEL PDS", "size": 1120, "date": "1992-11-17", "time": "11:09" }, { "name": "PEEL PDK", "size": 1022, "date": "1992-11-17", "time": "11:09" }, { "name": "EXAMPLES DOC", "size": 1563, "date": "1992-11-17", "time": "11:09" }, { "name": "V8GATES APL", "size": 4052, "date": "1992-11-17", "time": "11:09" }, { "name": "V8REGS APL", "size": 6109, "date": "1992-11-17", "time": "11:09" }, { "name": "V8CLKADD APL", "size": 4422, "date": "1992-11-17", "time": "11:09" }, { "name": "V8BUSMUX APL", "size": 4587, "date": "1992-11-17", "time": "11:09" }, { "name": "V8COMP APL", "size": 4957, "date": "1992-11-17", "time": "11:09" }, { "name": "V8FCNTR APL", "size": 7291, "date": "1992-11-17", "time": "11:09" }, { "name": "V8CPORT APL", "size": 6261, "date": "1992-11-17", "time": "11:09" }, { "name": "V8SYNC APL", "size": 4489, "date": "1992-11-17", "time": "11:09" }, { "name": "PRI173 APL", "size": 5133, "date": "1992-11-17", "time": "11:09" }, { "name": "MAG273 APL", "size": 5213, "date": "1992-11-17", "time": "11:09" }, { "name": "EQU273 APL", "size": 4195, "date": "1992-11-17", "time": "11:09" }, { "name": "V10CNT8 APL", "size": 8972, "date": "1992-11-17", "time": "11:09" }, { "name": "V10ZPORT APL", "size": 8513, "date": "1992-11-17", "time": "11:09" }, { "name": "ANEWV8 APL", "size": 1455, "date": "1992-11-17", "time": "11:09" }, { "name": "ANEWG10 APL", "size": 1699, "date": "1992-11-17", "time": "11:09" }, { "name": "ANEWV10 APL", "size": 1604, "date": "1992-11-17", "time": "11:09" }, { "name": "ANEWV10Z APL", "size": 1932, "date": "1992-11-17", "time": "11:09" }, { "name": "ANEW173 APL", "size": 1437, "date": "1992-11-17", "time": "11:09" }, { "name": "ANEW273 APL", "size": 1507, "date": "1992-11-17", "time": "11:09" }, { "name": "ANEW153 APL", "size": 1262, "date": "1992-11-17", "time": "11:09" }, { "name": "ANEW253 APL", "size": 1336, "date": "1992-11-17", "time": "11:09" }, { "name": "V8GATES ABL", "size": 4261, "date": "1992-11-17", "time": "11:09" }, { "name": "R8CNTR JED", "size": 3329, "date": "1992-11-17", "time": "11:09" }, { "name": "R8CNTR JEX", "size": 5578, "date": "1992-11-17", "time": "11:09" }, { "name": "PEEL HLP", "size": 19528, "date": "1992-11-17", "time": "11:09" }, { "name": "PLDLOAD EXE", "size": 49408, "date": "1992-11-17", "time": "11:09" }, { "name": "PEELEDIT COM", "size": 54568, "date": "1992-11-17", "time": "11:09" }, { "name": "PEELEDIT 000", "size": 30976, "date": "1992-11-17", "time": "11:09" }, { "name": "PEELEDIT MSG", "size": 1786, "date": "1992-11-17", "time": "11:09" }, { "name": "PEEL SAV", "size": 179, "date": "1993-12-31", "time": "16:28" }, { "name": "PKZIP EXE", "size": 42166, "date": "1993-01-31", "time": "21:04" } ] } ], "volume": "ICTPEEL" } }, "desc_file": "README.DOC", "desc_text": "\r\n WELCOME to the ICT PEEL Development Software!\r\n\r\n\r\n*************************** Table of Contents ********************************\r\n\r\nSection 1 - System Requirements and software initialization\r\nSection 2 - About Version 3.60 ...\r\nSection 3 - About Version 3.55 to 3.58...\r\nSection 4 - About Version 3.50 ...\r\nSection 5 - About Version 3.40 ...\r\nSection 6 - About Version 3.30 ...\r\nSection 7 - About Version 3.20 ...\r\nSection 8 - About Version 3.10 ...\r\nSection 9 - About Version 3.00 ...\r\n\r\nAll users should read sections 1 and 2.\r\n\r\n\r\n***************************** Introduction ***********************************\r\n\r\nThis document briefly describes the system requirement, software\r\ninitialization, and additions or changes of the previous software versions.\r\n\r\nThis diskette contains software which can be executed with or without the\r\nprogrammer hardware for the PEEL Development System (PDS-1). The software will\r\nautomatically initialize to PDS-1 if the programmer hardware is present.\r\n\r\nFor more information, refer to your users manual, select the HELP command from\r\nthe main screen after the software has been executed, or read the following:\r\n\r\n\r\n****************************** Section 1 *************************************\r\n\r\nSYSTEM REQUIREMENTS\r\n\r\n- IBM PC,XT,AT or compatible\r\n- Minimum 384K RAM memory\r\n- Monochrome or Color Display\r\n- One high density floppy disk drive and a hard disk\r\n- DOS version 2.1 or greater\r\n\r\nNote: PC address location = 259 HEX\r\n PC data location = 258 HEX\r\n\r\n\r\nHARD DISK INSTALLATION:\r\n\r\n1. Turn computer on.\r\n2. Boot-up DOS 2.1 or greater.\r\n3. Make sure you have a back-up copy of the original diskettes.\r\n4. Insert the PDS-1 diskette into drive A.\r\n5. At the drive A cursor (A>), type \"INSTALHD\" followed by the ENTER key.\r\n This will create a directory named PEEL and copy all files from the\r\n PDS-1 diskette into that directory, and then start the software.\r\n6. Answer the system set-up questions for system type, color, and sound.\r\n7. The PEEL software is now ready for operation.\r\n\r\n Subsequent use after software is installed:\r\n\r\n1. Turn computer on.\r\n2. Boot-up DOS 2.1 or greater.\r\n3. Change to the PEEL directory by typing \"CD\\PEEL\".\r\n4. Type \"PEEL\" followed by the ENTER key (press the ENTER key twice to bypass\r\n the messages).\r\n5. The PEEL software is now ready for operation.\r\n\r\n****************************** Section 2 *************************************\r\n\r\nAbout Version 3.60 ... (Changes and Additions to V3.58)\r\n\r\n 1. Programmer - Change 18CV8 verify vpp voltage to 13 volts to make it work\r\n for different speed of 18cv8.\r\n\r\n****************************** Section 3 *************************************\r\n\r\nAbout Version 3.55 to 3.58 ... (Changes and Additions to V3.50)\r\n \r\n 1. Programmer - Add PEEL22CV10A and PEEL22CV10A+\r\n 2. Translator - Add 18V8 to 18CV8.\r\n 3. Translator - Add SIG 16SV8 to 18CV8.\r\n 4. Translator - Add PAL 20C1 to 173.\r\n 5. Translator - Add FPLA473 to PEEL273, used a pin 13 substituion.\r\n 6. Translator - Add 18U8 to 18CV8.\r\n 7. Translator - Fixed bug for 16V8 to 18CV8.\r\n 8. Programmer - Added auto-handler.\r\n 9. Simulator - Fixed bug fault grad.\r\n 10. Simulator - Fixed bug for 22CV10.\r\n\r\n****************************** Section 4 *************************************\r\n\r\nAbout Version 3.50 ... (Changes and Additions to V3.40)\r\n\r\n 1. Programmer - Add initial calibration.\r\n 2. Programmer - Change PC address and Data to variable.\r\n 3. Translator - Add PAL20ARP4, 20ARP6, 20ARP8 and 20ARP10 to PEEL20CG10,\r\n 22CV10 and 22CV10Z.\r\n 4. Translator - Add PAL20RP4, 20RP6 and 20RP8 to PEEL20CG10, 22CV10 and\r\n 22CV10Z.\r\n 5. APEEL - Fixed simulation bugs for Feed_Or configuration.\r\n 6. Loader - Deleted Continuity-Test for CYP22V10.\r\n 7. APEEL - Fixed 22CV10Z and 20CG10 feedback polarity bug.\r\n\r\nNote: Please refer to the HELP file (PEEL.HLP) for description of features not\r\n discussed in the manual. The PEEL.HLP file can be accessed from PEEL.EXE\r\n program.\r\n\r\n\r\n****************************** Section 5 *************************************\r\n\r\nAbout Version 3.40 ... (Changes and Additions to V3.30)\r\n\r\n 1. Translator - Add zero-power mode and signature selection mode.\r\n 2. Translator - Fixed PEEL173 and PEEL273 bug.\r\n 3. Translator - Add PAL22AP10-to-PEEL273 and PAL22AP10-to-PEEL20CG10.\r\n 4. APEEL and Translator - Optimized PEEL22CV10Z JEDEC file.\r\n 5. Loader - Deleted Continuity-Test for GAL16V8.\r\n 6. APEEL - Fixed Macrocell Configuration bug (\"LATCH\" is not a reserved word).\r\n\r\n\r\n****************************** Section 6 *************************************\r\n\r\nAbout Version 3.30 ... (Changes and Additions to V3.20)\r\n\r\n 1. Translator - Fixed EP320-to-PEEL18CV8 bug.\r\n 2. Translator - Fixed GAL16V8-to-PEEL18CV8 bug.\r\n\r\n\r\n****************************** Section 7 *************************************\r\n\r\nAbout Version 3.20 ... (Changes and Additions to V3.10)\r\n\r\n For PDS-1 only:\r\n 1. GENERAL - Decreased programming/verification time.\r\n\r\n\r\n****************************** Section 8 *************************************\r\n\r\nAbout Version 3.10 ... (Changes and Additions to V3.00)\r\n\r\n 1. GENERAL - Increased execution speed (about 30 to 50% faster than V3.00),\r\n especially for users with 80x86 (e.g. 80286, 80386) computers.\r\n 2. GENERAL - Add DOS command shell.\r\n 3. GENERAL - add faster sort routine for file selection menu.\r\n 4. APEEL - add \"AUTO_SECURE\" mode. JEDEC file created by APEEL has the\r\n security bit mode set (\"G1\").\r\n\r\n\r\n****************************** Section 9 *************************************\r\n\r\nAbout Version 3.00 ... (Changes and Additions to V2.40)\r\n\r\n 1. GENERAL - Increase RAM memory requirement from 256 to 384 K-bytes.\r\n Notes: If you have only 256 K-bytes of RAM memory, most functions\r\n in the PEEL software will operate properly. The three\r\n functions not operating are the PLD (e.g. PAL, EPLD, GAL\r\n and FPLA) loaders, translators, and editor. However, you\r\n can run PEELXLT.EXE (translator) and PEELEDIT.COM (editor)\r\n from MSDOS.\r\n 2. GENERAL - Add COM transmit/receive (IBM or 100% IBM compatible PC only).\r\n 3. GENERAL - Add video terminal emulation mode (IBM or 100% IBM compatible\r\n PC only).\r\n 4. GENERAL - Add file utilities for create and remove directory, and erase\r\n and rename file.\r\n 5. TRANSLATOR - Add PAL 24-pin (small and medium series) to PEEL20CG10.\r\n 6. TRANSLATOR - Add GAL20V8 to PEEL20CG10.\r\n 7. TRANSLATOR - Translator can be executed from MSDOS. Type \"PEELXLT\" will\r\n display the command format.\r\n 8. APEEL - Fix syntax error checking bugs.\r\n\r\n For PDS-1 only:\r\n 9. LOADER - Add PAL 24-pin (small and medium series).\r\n10. LOADER - Add PALC22V10.\r\n11. LOADER - Loaders for all PLDs (excluding PEEL devices) are modularized into\r\n a separate program called \"PLDLOAD.EXE\". YOU MUST NOT EXECUTE THIS\r\n PROGRAM FROM MSDOS. The PLDLOAD.EXE must interface with the\r\n PEEL.EXE program.\r\n\f\u001a" }