主存出错

Author: 方风波 Date: 1997-01-01

  After power up,the  monitor re-mainsblank,and there are beep sounds indicating a main memory failure. In this case,turn off the  power and re-move all SIMM modules.Carefully place the modules  back to the sockets and make sure  that  all the modules are locked by the locking latches firmly.
  加电后,监视器屏幕无显示,并有表示主存出错的嘟嘟声,在这种情况下,应关断电源并取下所有的SIMM内存条,然后细心地将这些内存条重新插心地将这些内存条重新插内存条均被锁闩牢牢地锁住。
  In some  other cases, the total memory found by the BIOS is different from  the actual amount of memory on board.It is also a memory failure and you can follow the instruction above.
  在某些其它情况下,由BIOS发现的总内存与板上内存的实际容量不同,这也是内存的故障,可按照上述方法排除。